Brochure PDF 
Qualifications 
Size Chart
 IGES Drawings
| Cushion Grommet |
Lightening
Hole |
Inside Right Angle |
Irregular Hole |
Fabric Fastening |
 |
| Outside Right Angle |
U-Shape (Mouse Hole) |
Notched Slot |
Oval Slot |
Flexi- GrommetT 4 Axis |
High Performance Wire Protection Grommet Edging
Solutions! The UL94 V-0 edge protection of choice
for applications that include aerospace, telecom,
computers, switching equipment, construction equipment,
medical units, and instrumentation.
Snapping on in seconds, Spring-Fast wire protection grommet edge protection
significantly reduces installed cost by eliminating
the need for application of heat or toxic adhesives
(and the extra application media that goes along with
them) and eliminating clean up and cure time. And
further, it’s two and four-axis flexibility
applies easily and securely to single and multiplane
applications and to small inside and outside radii.
Designed for Efficient Manufacturing & Assembly
Spring-Fast® Offers
- Sheet thickness of 0.020” (.5 mm) to 0.250
(6.4 mm)
- Factory discrete cut lengths or private branded
kits of a plurality
of factory precut lengths of
- 25 ft. (7.8 m), 100 ft. (30.5 m), 500 ft. (150
m) reels
- Roll-Fast™ installation roller
- Full by-pass shears for burr free cut off
- Spring-Fast® cutter cart
Spring-Fast® Eliminates
- Toxic adhesives
- Application media
- Clean up & cure time
- Application of heat
- Custom molding costs
BETTER
We are not interested in a solution that’s merely okay.
Before Spring-Fast® wire protection grommet
edging, to protect wires from abrasion was the adhesive
application of plastic wire protection grommets into through-holes
or edges.
But, the better solution goes outside the box
Why clean metal with VOC-laden solvents? Why adhesive
bond plastics if it requires training and special
garments? Why clamp it while it cures? Why use the
heat gun to activate an adhesive? Why hold up production
like this?
We took a step back and asked, why adhesive or heat
guns at all?
A snap-on solution—cleaner, better, faster—is what
DTi developed
Spring-Fast® is better because the whole flow of through-hole
protection of cables and wires, fiber and hoses is speeded by a
magnitude… and it needs no special handling, no special training,
no special gear. When you look at wire protection as a system, as
the part plus its procedures plus its labor, Spring-Fast®
cuts costs in half or more. Better.
CLEANER
Spring-Fast® wire protection grommet edging
side-steps all the mess of adhesive applications.
But it’s also a clean solution because it’s
the simple answer to the problem. DTi considered not
just through-hole or edge protection for product as
it goes out the door, but protection that remains
viable through the product lifecycle, in the most
severe of environments.
Spring-Fast® wire protection grommet edging
sidesteps long term embrittlement in low humidity
environments. It’s chemically resistant to most
hydrocarbons, Skydrol immersion and salt spray. Finally,
it has outstanding shock and vibration characteristics.
In short, the Spring-Fast® wire protection
grommet edging design encompasses assembly, field
use, and maintenance. When you work with DTi, the
problem receives the same systematic approach. Our
track records are clean solutions that work not just
in the short term, but for the entire product life.
Even with products like aircraft that have long, hard
lives, our solutions continue to save money and time…even
when it’s time to modify, repair, or overhaul.
FASTER
Spring-Fast® was designed for manufacturing
flexibility. As a result, we’re prepared to
handle the requests and changes our customers need.
|
